Home / Blog / Planning & preparation
Planning & preparation

What drawings do you need for an attic conversion?

A room layout is only one part of the picture. Learn what to ask about existing plans, sections, planning drawings and the details needed before work starts.

AI design concept

For an attic conversion, ask what drawings are needed for each stage: recording the existing house, agreeing the proposed layout, any planning process, and designing the work for construction. There is no single drawing pack that suits every house. For a Cork homeowner, the useful first question is: “What does this drawing establish, and what still needs to be checked?”

Start with the existing house

Gather any plans you already hold, including drawings for previous alterations. Tell the survey team if the house differs from them. Treat an old estate plan or a sketch as starting information until the relevant dimensions and conditions have been checked on site.

Ask which parts of the house the survey will record. The attic and the floor below need to be considered together when discussing a new staircase. Mark the room use you want and the spaces downstairs you hope to retain, rather than trying to draw a finished structural solution yourself.

Ask for views that answer different questions

A floor plan shows the arrangement viewed from above. A section cuts through the building to explain the relationship between heights and levels. An elevation shows an external face. Ask your designer which views are needed to explain your proposal clearly. The following is a discussion checklist, rather than a statutory submission list.

Drawing or informationQuestion to ask
Existing and proposed floor plansWhere do the stairs, landing, doors and rooms sit, and what changes on the floor below?
Sections through the attic and staircaseHow do the proposed finished floor, roof slopes and stair route relate to one another?
Elevations where external changes are proposedWhat will the rooflights, dormer or other proposed changes look like from outside?
Structural details and calculations as required by the designWho designs the floor, roof alterations, supports and connections, and when are those details issued?
Written specification alongside the drawingsWhich insulation, ventilation, finishes and service work are included, and which choices remain open?

Make the section drawing earn its place

Before approving the layout, ask the designer to walk you through a section at the stairs and through the proposed room. Ask where dimensions refer to existing surfaces and where they refer to the intended finished surfaces. A roof-peak measurement alone does not describe the space you will have after the conversion.

Include the furniture you expect to use in the layout discussion: for example, the bed position and the route to a wardrobe. This is a way to test your brief with the designer, not a substitute for assessing compliance or usable headroom.

Separate planning drawings from the details needed to build

If your proposal requires a planning application, ask the appointed professional to confirm the submission requirements for the relevant Cork planning authority. Cork City Council’s validation checklist checks that floor plans, elevations and sections correspond, that existing and proposed work is distinguished, and that principal dimensions are shown. Those checks illustrate why a clear, consistent set matters; the checklist is not a decision on whether your attic proposal needs permission.

Ask separately which construction details and specifications will be available before each part of the work begins. A drawing prepared to explain a planning proposal should not be assumed to settle every structural connection, insulation detail or service route. Get the responsibilities and outstanding design items recorded in writing.

The National Building Control Office advises professional design advice for attic work. It also states that relevant Building Regulations apply irrespective of whether works are subject to building-control notices, applications or certification. Ask your professional to confirm the requirements for your actual scope; an informal sketch does not demonstrate compliance.

Agree which version everyone is working from

Before agreeing the final scope, ask for a drawing list with titles, dates and revision references. Confirm which drawings the quotation and contract refer to. If a room or staircase changes later, ask how the revised drawing, price implications and any further professional checks will be agreed before that work proceeds.

  • Which dimensions and existing conditions have been checked, and what remains unconfirmed?
  • Which drawings describe the agreed layout, including changes below the attic?
  • Who prepares the structural design and other required details?
  • Which planning or building-control steps apply, and who is responsible for them?
  • Which drawing revisions and specification form the agreed scope?
  • What updated documents will be supplied at handover?

Bring the drawings into your AtticHaus discussion

AtticHaus’s published inclusions guide states that the signed quotation, drawings, engineering design and contract define the exact project scope. Send the drawings you already have with your intended room use and the questions they leave unanswered. Ask what further survey and design information is needed before treating a preferred layout as agreed.

Sources & further reading

Prepared with AI-assisted research using the sources above and AtticHaus’s published information. General guidance; the relevant professionals must assess your particular house and proposed works.