Before choosing an attic en-suite shower or vanity unit, ask your design team to work through the room position, finished heights, service routes and ventilation. A useful layout must explain how you will use the room and how it will be built. This seven-point brief helps Cork homeowners prepare that conversation without trying to design the plumbing or structure themselves.
1. Decide what the en suite needs to do
Write down who will use it and what matters most: a generous shower, somewhere to put toiletries, an easy-to-clean arrangement or retaining more bedroom space. Rank those priorities. If every item is described as essential, it is harder to compare two workable layout options.
Ask to see the bedroom and en suite together. Check the route from the bed to the bathroom, the bathroom door position and the remaining space for bedroom furniture. A larger bathroom is not automatically a better overall attic layout.
2. Discuss the shower under the actual roof shape
Ask the designer to show the proposed shower in a section through the attic, with the intended finished floor and ceiling. Discuss where you would stand, enter and turn, and where the shower head and enclosure would sit. Do not choose a tray solely because its outline fits on a floor plan.
Bring the dimensions and installation information for any product you are considering. Ask the team to check them before ordering. If the preferred layout needs a dormer or another roof alteration, have its feasibility, cost and planning position assessed before treating the extra space as agreed.
Compare dormers and rooflights as part of the whole room design
3. Ask the plumber to assess services before fixing the positions
Ask where the basin, toilet and shower would connect to the existing water and drainage systems. Have the plumber explain what needs checking, what alterations are proposed and whether the arrangement affects rooms below. A preferred fixture position is a starting point for assessment, rather than proof that a suitable connection is available.
Include the hot-water supply and any existing tank arrangements in the discussion. Ask what must remain accessible after the room is finished. Avoid buying a shower system on the assumption that it will suit the existing services.
Plan the water tank and future access alongside the room layout
4. Agree the ventilation approach early
SEAI explains that showers add water vapour to a home and that extract ventilation removes moisture from wet rooms to the outside. Its homeowner guidance recommends mechanical extraction for wet rooms. Ask the designer how the new en suite will fit into the ventilation approach for your house, rather than assuming an openable roof window settles the question.
Ask the team to identify the proposed extract route and external outlet, controls and maintenance access. Request the selected system’s operating and cleaning instructions at handover. The design and specification need to suit the actual house; this brief does not set a fan size or airflow rate.
Read SEAI’s homeowner guidance on ventilation systems
5. Check everyday movements and storage
Walk through the proposed arrangement with the designer: entering the room, opening the shower enclosure, using the basin and reaching towels. Ask how door and cupboard openings will work together. Mark where the mirror, lighting, toilet-roll holder and towel storage are intended to go before those details become last-minute choices.
For a fitted vanity or concealed service enclosure, ask what can be removed or opened for maintenance. Confirm the actual product dimensions and the installer’s requirements; a photograph of another bathroom cannot establish that the same arrangement fits yours.
6. Turn finish preferences into a clear selection list
AtticHaus currently publishes an en-suite guide allowance of €10,000 excluding VAT, subject to layout, services and finish selections. It is an early budgeting guide, not a fixed quotation or a promise that every product choice is included. Your agreed project documents define the final scope.
- List the shower tray, enclosure, shower fittings, toilet, basin and taps you want priced.
- Identify the proposed wall and floor finishes and ask what preparation and waterproofing system is specified.
- Confirm whether the mirror, storage, lighting, extractor and towel-heating choices are included.
- Record who supplies each item, any allowances and what happens if a selection exceeds them.
- Ask which decisions and orders must be completed before the relevant work begins.
Check the current AtticHaus guide pricing
Read the typical inclusions alongside your project-specific quotation
7. Keep approval and compliance checks separate from the shopping list
A preferred en-suite layout does not establish the planning or regulatory position of the conversion. Ask the relevant professional to assess the full proposal, including any external changes. NBCO advises professional design advice for attic work and states that relevant Building Regulations apply irrespective of whether particular building-control notices, applications or certification are required.
Read NBCO’s attic guidance in FAQs 40–42
Read the separate attic planning-permission guide
For your initial AtticHaus discussion, send any existing drawings and a short brief: who will use the room, your three priorities and any fittings you have in mind. Ask which parts of the layout can be confirmed now and which depend on survey, design or service checks. That gives you a clearer basis for selecting products and agreeing the final scope.
Start an assessment for your Cork attic conversion
Sources & further reading
- SEAI: Ventilation systems — wet-room extraction and moisture
- National Building Control Office: attic conversion guidance, FAQs 40–42
- AtticHaus: current en-suite guide allowance and conditions
- AtticHaus: typical inclusions and project-specific scope
Prepared with AI-assisted research using the sources above and AtticHaus’s published information. General guidance; the relevant professionals must assess your particular house and proposed works.